TLX TYPE plate heat exchanges
Technical characteristics of TLX type plate heat exchangers:- Temperature: -40ºC up 170ºC
- Pressure : max. 25 bar
- Max. flow rate : 1000 m3/h
- Connections: DN 40 – DN 200
- Gaskets materials : NBR, EPDM, chloroprene, Viton, Butyl and other materials on request
- Plates materials : W 1.4301,W 1.4401, W 1.4539, W 1.4571, SMO 254, Titan, Hasteloy
The plates and gaskets materials are selected using a specialized dimensioning software, according to the following parameters: fluid’s pH and chemical composition, fluid’s temperature operating temperatures and operating pressure.
| Type | DN [mm] |
Heat
transfer area m2 |
|
Weight
[KG] |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TLX 50 | 40 | 25 | 845 | 325 | 250-2000 | 125 | 363 | 70÷350 | ||||||||||
| TLX 90 | 40 | 33 | 845 | 335 | 250-2000 | 125 | 565 | 120÷600 | ||||||||||
| TLX 150 | 40 | 53 | 1105 | 335 | 250-2000 | 125 | 825 | 160÷830 | ||||||||||
| TLX 250 | 100 | 82 | 1140 | 550 | 500-2000 | 256 | 774 | 510÷1820 | ||||||||||
| TLX 400 | 80 | 115 | 1600 | 475 | 500-2500 | 212 | 1207 | 390÷2100 | ||||||||||
| TLX 500 | 100 | 280 | 1620 | 550 | 500-4000 | 256 | 1255 | 690÷4110 | ||||||||||
| TLX 650 | 200 | 300 | 1750 | 730 | 500-4000 | 305 | 1153 | 700÷4700 | ||||||||||
| TLX 850 | 200 | 500 | 2290 | 730 | 500-4000 | 305 | 1683 | 1000÷7000 | ||||||||||
- High efficiency
- Low fouling, due to high turbulence
- Resistance against corrosion
- Compact design, low installation room needed, low weight
- Modular system, with high flexibility, with the possibility of further changes of the number of plates
- Easy to clean, easy to install, easy to maintain